Click image to view full size image
Description:
plastic crushing machine for saleEnergy saving
Low price, high profit
High efficiency.
Environment friendly
1.This machine is used to treat solidplastic material, just like pet bottles, pp/pvcbarrels and so on.
2.It can crush,wash, and dry the material,finally you will get clean, dry flakes,which can be used to make granules directlyor some other use.
Dura-shred ''s two shaft shredders are designedwith an aggressive low RPM, high torque shredding technology. Eachshaft is driven by its own Siemens motor, giving it plenty of powerto drive through tires and thick steel beads. The shredder bladethickness ranges from 25 mm to 152 mm(1”-6”) depending on the typeof tires, throughput, and desired end product. All of our bladesare made from exotic steel and heat treated to an average 56-60 onthe Rockwell Scale. The shredder machine can process pre-cut OTRtires, truck tires, and car tires at a rate of up to 5 tons perhour.
Equipmentspecification:
We designour equipment to accomplish the following-
- cutstorage and disposal costs
- reducescrap volume up to 80%
- aid inthe safe disposal of sensitive, substandard or hazardousmaterials
We design ourshredders based on the following applications
- Tires
- Plastics
- MunicipalSolid Waste
- Non-ferrousMaterials
- Aluminum
- Paper
- HazardousWaste
- PCBCapacitors
- BulkyWaste
- Low RADWaste
- Fiberglass
- Construction/DemolitionDebris
- Cloth -Canvas, Rags, Clothing
- PlasticSheeting, Buckets
- Pallets
- PVC Pipes& Tubes
- Wood
- documentDestruction
Dura-Shred Two Shaft Shredder is driven by 150 hp motors toshred any and all types of micellanous bulk waste using a 38mm(1.5"), 76 mm(3”), or a 152 mm(6") cut for volume reduction.
We provide our customers with proven design and technology,equipment value and affortable price structure, and one of the bestwarrantees in the industry.
Tire RecyclingProcess:
Dura-Shreduses its experience and success to continually improve the designand manufacturing of our tire recycling systems to make them moreeffective and efficient throughout the reduction process. Thereduction from whole tires to crumb rubber is accomplished throughour:
1.PrimeShredder
Dura-ShredDual Shaft Shredder 150: 150 hp rotating the blades, truck and carsize tires are reduced to rough 3”shredded strips through the PrimeShredder. Rough shred is then recirculated until it can be sent tothe Grater via a conveyer.
2.TheGrater
Dura-ShredGrater 150: The Grater takes the chips and reduces them to10mm-12mm. At this point 95%-97% of
the steelhas been stripped and is removed with our magnet belt as the rubbermulch is transported
to the vibratory tables forseparation. This will be the end of the mulch producing line. Forcrumb
rubbersteel free mulch will be sent via conveyor to the Granulators forfurther processing.
3.Granulator
Dura-ShredGranulator: The G1 reduces the rubber down to a 5mm-7mm or 10-20mesh, which is then removed
through ascreening system. Additional steel and fiber are then removedthrough an air and vibratory
systembefore being sent to the surge bin for collection.
Scopeof Project:
System isdesigned to produce the following byproducts: Steel, Fiber, TireDerived Fuel Chips (TDF), Rubber
Mulch,Rubber Powder.
SystemCapacity:
Capacityfor this system is 2.5 metric tons of input per hour.
CrumbSize:
10mm - 14mmMulch (Can be removed after The Grater)
4mm-6mm and10 / 20 mesh. (After the Granulators)
CrumbRubber Purity:
95% Free ofTextile.
95% Free ofSteel.
95% Free ofStones and other contaminants.
SteelPurity:
92%-94%Contaminant free.
Power:
Power Type:440V / 3Ph / 60Hz
TotalKilowatts: 607
EstimatedPower Usage Per Hour of Operation: *** $65.56
***based ona price of $018 per kilowatt hour.
Development space ofmarket:
The methodof recycling waste tyre is that separating the inner steel wire andfiber from waste tires through many kinds of technologies andgrinding the rubber granules into powder.Waste tyre treatmentequipment are suitable for international development and managementstyle. It’s most advantage is it can recovery waste tyres to rubbergranules/powder reaching to the availability 100%.
The rubberpowder is widely used and almost covers all industrial fields. Itcan replace the material such as plastic and PVC, instead of naturerubber, be rebirth tires .It is used in sport runway and shoesoles; it also can be used to highway, air trip as well as thirdgeneration railway sleeper as modification asphalt.
Process:
Wastetyres-—— rough shredding tyre blocks into pieces (50mm-100mm)(TDFplant)——medium shredding into smaller ones(10mm-20mm)(Mulchplant)——fine shred into granules(3mm-4mm)(Crumb plant)——grind thegranules into powder(20-100mesh)——magnetic separator for thin steelremoving——fiber separator for rubber removing——packing
Rubber powderapplication:
1.Paving sportground:
Runway,school sporting field, garden path, bowling alley, pavement,recreation field, basketball field, etc.
2.Automobileindustry:
Train’sfloor, disc silk ribbon for braking, soleplate of automobile andtruck, shake sleeve, seal stripe, buffer, shock absorber, dailymaterial for ocean shiping, tyres and inner unerlay of tyres,etc.
3.Architectureand equipment:
Adhensive/sealant,floors of hospital, company, insulated rubber material, carpetcushion, grass cushion for family animal, extruded products, moduleproducts, coating, bricks, thin slice, water-proof material,etc.
4.Application ofgeotechnical/asphalt
Drainagepipe, asphalt modified by rubber powder which can be used toconstruct highway and drivingway, filter, adjusting soil/coatinglayer for road surface, washing pipe with holes, runway for horserace, barrier for traffic or pavement, etc.
5.Regenerativerubber:
Rubberproducts manufacturing.
6.Otherapplication
ProvenDesign and Technology.
A qualitysystem with at an affordable price!
FullyAutomated via 1 centrally located touch screen controlpanel.
Backed withone of the best Warrantees in the industry
Plz enquiry us freely, ifyou got any questions.
High quality low price waste plastic crushing machine for sale in plastic recycling plant
